STSPIN233 of STMicroelectronics provides a high level of integration, allowing three diffluent topologies and three independent inputs, making it possible to use FOC sensorless algorithms in portable IoT applications.
The stmicroelectronics IPS4260L is a monolithic high-speed device capable of driving four independent capacitive, resistive or inductive loads with one side power connection voltage. Four integrated diodes clamp the inductive load to produce a switching transient. Built-in hot shutdown protection chip to prevent overheating and short circuit
Stmicroelectronics has begun limited production of EnFilm's advanced rechargeable batteries, which are less than 0.25mm thick. These paper-thin batteries free designers from the limitations of standard battery sizes and are ideal for powering the next generation of personal technology and iot devices
STMicroelectronics' STM32G0 series microcontroller (mcu) based on Arm Cortex-M0+has been upgraded in 32-bit performance and integration, and has the core functions of STM32 family, which is particularly suitable for cost sensitive applications
STMicroelectronics has introduced the L3751 Synchronous step-down controller with a compact size and input voltage range of 6V to 75V for a variety of applications ranging from industrial equipment to pure electric light vehicles,To improve energy efficiency and minimize ripple current, the L3751 is in diode simulation mode with pulse-jump function under light load.
STMicroelectronics, a global leading semiconductor company serving multiple electronic applications, has introduced a new road noise cancellation (RNC) MEMS sensor. The new product adopts active noise control (ANC) technology to reduce road noise, making the car more comfortable and quiet. In the past, engine performance, appearance design and gearbox were the three defining elements of automobile; Now, drivers and passengers pay more and more attention to driving comfort.
STMicroelectronics has introduced a new road noise cancellation (RNC) MEMS sensor. The new product adopts active noise control (ANC) technology to reduce road noise, making the car more comfortable and quiet
STMicroelectronics's L99LDLH32 linear current stabilizer provides a simple integrated solution for controlling dynamic automotive lighting using the lightweight CAN FD Light protocol. OLED lights can emit bright, uniform and high-contrast light from very small surfaces, and the new driver is perfectly matched to OLED, allowing designers to create complex patterns and light effects that enhance vehicle safety and design visuals.
A high-performance two-way operational amplifier has been added to the 5V product series of ST. The gain bandwidth (GBW) is 30MHz, the input offset voltage (typical value) is 50 µ V. The new product TSV78230MHz can realize high-speed and high accuracy signal conditioning.
STMicroelectronics' IPS1025HFQ is a monolithic architecture in M0T5 VIPower Technology and assembled in QFN48L (8 mm x 6 mm) Package. The IC is single high-side switch device which can drive capacitive, resistive, or inductive loads with one side connected to ground (high-side switch)
Stmicroelectronics VL53L7CX Time-of-flight (ToF) sensor is designed for applications requiring an ultra-wide field of view, providing a 90° diagonal field of view (FoV). Based on ST's FlightSense technology, the VL53L7CX incorporates an efficient metasurface lens [Diffraction Optical Element (DOE)] placed on the laser emitter to project a 60°x 60° square field of view onto the scene.
STMicroelectronics' 6 V to 75 V wide input voltage range L3751 synchronous buck controller features an extreme voltage conversion ratio over switching frequency range (100 kHz to 1 MHz) due to 40 nsec minimum conduction time
STMicroelectronics' ISM330IS is a system-in-package featuring a 3-axis digital accelerometer and a 3-axis digital gyroscope, boosting performance at 0.59 mA in high-performance mode and enabling always-on low-power features for optimal motion results in industrial and IoT solutions.
STMicroelectronics' semiconductor EVL400W-80PL demonstration board is a 12V to 400W converter, which is tailor-made for the typical specifications of AC/DC adapters. Average efficiency. It is composed of the main control boards of L4985A and L6699 that installed high -voltage power devices, installation of integrated circuit controllers L4985A and L6699, and secondary control boards for synchronous rectification.
The STMicroelectronics hybrid dual-shutter sensor monitors the vehicle cabin in all directions, improving driving safety and comfort, and the rolling shutter & global hybrid dual-shutter image sensor expands the basic functions of driving monitoring, bringing more adaptable and convenient driving experience
STMicroelectronics has launched the L9918 automotive-grade alternator regulator, which ensures the stability of 12V automotive electrical systems with enhanced functionality.
STMicroelectronics has released two STPOWER power modules with built-in 1200V silicon carbide (SiC) MOSFETs in mainstream configurations. Both modules are packaged in STMicroelectronics' ACEPACK 2 technology for high power density and easy installation. The MOSFETs in both modules use ST's second-generation SiC technology, with an excellent RDS(on) x die area figure of merit, ensuring that the switches can handle high currents with very low power losses.
STMicroelectronics' EVLVIPGAN50PD 45 W USB Type-C® Power Delivery 3.0 Adapter is an isolated power supply based on the VIPERGAN50, the VIPER series of offline high voltage converters featuring 650 V HEMT power GaN transistors designed for quasi-resonant flyback conversion controller design capable of delivering up to 45 W of output power over a wide range
