The L4970A is a highly efficient step-down power switching regulator capable of delivering up to 10A with an adjustable output voltage range from 5.1V to 40V. Utilizing BCD mixed technology and a DMOS output transistor, it achieves fast switching and low power loss.
The LM293D is an integrated dual-channel voltage comparator that operates over a wide voltage range and supports both single and dual power supply modes.
The TDA7560 is a high-performance Class AB audio power amplifier built using advanced BCD (Bipolar, CMOS, DMOS) technology.
The UA741CN is a high-performance monolithic operational amplifier built on a single silicon chip, designed for a broad spectrum of analog applications. It features a high gain and operates across a wide range of voltages, making it exceptionally suitable for use in integrators, summing amplifiers, and general feedback circuits.
The TEA2025B is a versatile monolithic IC housed in a 12+2+2 Powerdip package, specifically for use as a dual or bridge power audio amplifier.
The L9637D is a monolithic integrated circuit, supporting the ISO 9141 standard for efficient communication between vehicles and diagnostic tools.
The TDA7379 is an automotive audio amplifier for car audio systems. It can provide high output power, typically achieving 4×45W, making it suitable for driving various speaker configurations.
The TDA2822M is a dual low-power audio amplifier integrated circuit (IC) commonly used in portable audio devices and low-power amplifier applications. It can operate with a low voltage supply, typically between 3V and 15V. The TDA2822M can drive both stereo (dual-channel) and bridge-tied load (BTL) configurations, allowing it to deliver output power up to 1W per channel in BTL mode.
The TDA7377 is a high-performance audio amplifier IC for automotive and other high-power audio applications. It operates as a bridge amplifier, capable of driving speakers with a total output power of up to 14 watts per channel.
The TL084CN is a high-performance operational amplifier with low noise, high slew rate, and wide bandwidth. It provides precise analog signal processing and excels in applications that require minimal distortion and high fidelity, such as audio amplification and active filtering.
The BU406 is a versatile NPN power transistor with a maximum collector current rating of 4A and a collector-emitter voltage rating of 60V, suitable for handling medium power levels. The BU406 has excellent thermal performance and is easy to install.
The 2SC5200 is a high-power NPN transistor commonly used in audio amplifiers and other high-power applications.The 2SC5200 can handle a maximum collector current of 15A and a maximum collector-emitter voltage of 230V.
The L200CV is a versatile voltage regulator that can be used for both positive and negative voltage regulation. It can be adjusted to provide an output voltage ranging from 2.85V to 36V with a maximum output current of 2A. The L200CV is commonly used in power supplies and other applications requiring a stable and adjustable voltage output.
The LM334Z is a three-terminal adjustable current source. Like the LM134 and LM234, its current output is determined by an external resistor and no other external components are required. The LM334Z can provide a current output from 1 µA to 10 mA by adjusting the external resistor between the pin and the negative supply pin.
In the current age of electric mobility, there is a crucial need for power electronics that are both efficient and high-performing. Traction inverters are crucial components in electric vehicles (EVs) as they are responsible for transforming DC power from the battery into AC power to operate the electric motor.
As the flagship product of the STM32 series of high performance and low power consumption, the STM32U5 continues the application range of the STM32F2/F4/F7, while having lower energy consumption and higher cost performance. In industrial control systems, U5 can undertake core functions such as master controller, system monitoring and graphic display.
STMicroelectronics has just announced an agreement to supply its 3rd generation silicon-carbide (SiC) planar MOSFETs for the e-compressor controllers from ZINSIGHT Technology, a Chinese high-tech company specializing in SiC power modules and advanced electric power conversion systems, used in “new energy vehicles” (NEVs), also dubbed EVs or BEVs outside China.
