publier sur février 22, 2023
Market demand for industrial applications is increasing day by day, data acquisition system is one of the key equipment. They are usually used to detect temperature, flow, liquid level, pressure and other physical quantities, and then convert the analog signals corresponding to these physical quantities into high-resolution digital information, which can be further processed by software
publier sur février 17, 2023
The component properties of resistors describe the material used to make the resistors themselves, not the external packaging material or substrate on which the resistors are mounted. Different components imply some differences in structure and lead to different characteristics that make certain types more suitable for certain applications or less suitable for certain environments
publier sur février 8, 2023
Condition monitoring is one of the core challenges of using mechanical facilities and technical systems today, such as using motors, generators and gears. Planned maintenance is becoming increasingly important to minimize the risk of production outages, not only in industry, but everywhere machines are used. In addition, the vibration mode of the machine is also analyzed.
publier sur février 6, 2023
Bipolar junction transistors (BJTS) can be turned on or off by base current. However, because the voltage drop at both ends of the base-emitter diode is largely temperature-dependent, a series resistor is required in many applications to keep the base current at the desired level, thus ensuring that the BJT operates stably and safely. Read this article to learn how to use RET to cope with the temperature dependence of standard BJTS.
publier sur janvier 7, 2023
In modern communication technology, whenever in the transmission of high-speed signals, especially in the process of radio frequency and microwave signal transmission, it is inevitable to encounter signal attenuation caused by return loss and radiation loss. How can this be improved?
publier sur décembre 27, 2022
Electronic engineers and technicians are accustomed to seeing noise as a negative factor and therefore optimize for low noise during component selection, circuit design, and circuit board layout. In fact, random or pseudo-random noise can sometimes be useful. This article will further explain why and how to use noise.
publier sur décembre 21, 2022
We live in an age of being wrapped in electronic devices that make learning, working, exercising, traveling and communicating very convenient, and wearables in particular are becoming an integral part of People's Daily lives. In medical applications, wearables can be used to monitor heart rate, blood pressure, blood oxygen levels, calories burned during exercise, sleep tracking and more. To provide a better user experience, high performance, small size and low power consumption are key metrics for these wearables
publier sur décembre 13, 2022
The market demand for industrial applications is increasing day by day, and data acquisition system is the key equipment. They are usually used to detect temperature, flow, liquid level, pressure and other physical quantities, and then convert the analog signals corresponding to these physical quantities into high-resolution digital information, which is then further processed by software.
publier sur décembre 6, 2022
Parasitic inductance refers to the inductance parasitic on the PCB wiring or other components of the circuit board. Generally speaking, there will be a parasitic inductance where there is a wire, such as the copper wire on PCB, through the hole, even the bonding wire inside the chip will have a certain amount of parasitic inductance, the inductance of these parasitic inductors is generally from a few nH to dozens of nH.
publier sur décembre 2, 2022
What is the chip? A "chip" is a small piece of silicon containing an integrated circuit, often part of a computer or other electronic device. A chip, or microcircuit, microchip, or integrated circuit, in electronics is a way of miniaturizing a circuit (mainly a semiconductor device, but also a passive component, etc.), usually on the surface of a semiconductor wafer.
